ODU MINI-SNAP Series L (IP50 and IP68)

Locking Concept Keying with Pin and Groove
• Shell size 0 to size 6;
• Up to 40 contacts per connector;
• Temperature range - Silicone version -50°C up to +250°C.

ODU MINI-SNAP Series K (IP68)

LP-Locking Concept Keying with Pin and Groove
• Shell size 0 to size 4;
• Up to 40 contacts per connector.

ODU MINI-SNAP - Series B (IP50 and IP68)

Locking Concept Keying with Pin and Groove
• Shell size 0 to size 3;
• Up to 40 contacts per connector;
• Temperature range - PUR version -40°C up to +80°C (Short-term up to +120°C);
• Temperature range - Silicone version -50°C up to +200°C (Short-term up to +230°C).

ODU MINI-SNAP® - Series F (IP50 and IP68)

Locking Concept Keying with Half-shells
• Shell size 0 to size 3.5;
• Up to 27 contacts per connector.

ODU MINI-SNAP - Series S (IP50 and IP68)

Locking Concept Keying with Insulation Body
• Shell size 0 to size 2;
• Up to 14 contacts per connector.

ODU MINI-SNAP

MINI-SNAP housings are made out of brass and are nickel plated with a a matt-chromate surface finish (sand-blasted). Nickel-plated or black chromate - finished housings are available on special request.
The nature of the push-pull connector is easy to explain:
• During insertion, the connector locks itself into the receptacle;
• It can no longer be separated by pulling on the connector cable.
The connector can, however, easily be separated from the receptacle by pulling back the outer sleeve.

Push-pull connector advantages:
• Quick and easy connect and lock;
• Quick and easy separation;
• Blind insertion and withdrawal are easy, even in hard-to-access locations;
• Low space requirements for devices;
• Unambiguous, certain locking states;
• Low energy expenditure;
• Suitable for robots.

Contact:
Eng. Alina Mitea
E-mail: alina.mitea@odu-rom.ro
www.odu-rom.ro
ODU ROM Manufacturing - Sibiu, Romania
Tel: 0748144488; Fax: 0269 221006
For general information visit: www.odu.de